2019

    P. L’Abbate, M. Dassisti, and A. G. Olabi, “Small-Size Vanadium Redox Flow Batteries: An Environmental Sustainability Analysis via LCA,” in Life Cycle Assessment of Energy Systems and Sustainable Energy Technologies: The Italian Experience, R. Basosi, M. Cellura, S. Longo, and M. L. Parisi, Eds., Cham: Springer International Publishing, 2019, pp. 61-78.
    [Download PDF] [abstract]

    Electrical energy production from renewable sources has dramatically grown in the recent years in the developed countries, putting the hard problem to be solved of supply discontinuity. How to reach high efficiency and reliability of electrical energy storage system is thus now one of the most challenging goals to be reached: among all, one of the most simple and widespread to use is the electrochemical storage systems. This paper analyzes the sustainability of a small vanadium redox flow battery performed by an LCA approach. This electrical energy storage system was selected for its significant advantages in use, such as the almost infinite lifetime of the vanadium electrolytes, which represent a potentially significant advantage in terms of a sustainable future made of less fossil fuels and more renewable energy. In fact, the LCA analysis performed shows that the production of the battery has a moderate impact, including the effect toxicity while at the end of life, the material and the electrolyte are completely reusable with a small fraction that goes to landfill disposal.

    @incollection{labbate_small-size_2019,
      address = {Cham},
      series = {Green {Energy} and {Technology}},
      title = {Small-{Size} {Vanadium} {Redox} {Flow} {Batteries}: {An} {Environmental} {Sustainability} {Analysis} via {LCA}},
      isbn = {978-3-319-93740-3},
      shorttitle = {Small-{Size} {Vanadium} {Redox} {Flow} {Batteries}},
      url = {https://doi.org/10.1007/978-3-319-93740-3_5},
      abstract = {Electrical energy production from renewable sources has dramatically grown in the recent years in the developed countries, putting the hard problem to be solved of supply discontinuity. How to reach high efficiency and reliability of electrical energy storage system is thus now one of the most challenging goals to be reached: among all, one of the most simple and widespread to use is the electrochemical storage systems. This paper analyzes the sustainability of a small vanadium redox flow battery performed by an LCA approach. This electrical energy storage system was selected for its significant advantages in use, such as the almost infinite lifetime of the vanadium electrolytes, which represent a potentially significant advantage in terms of a sustainable future made of less fossil fuels and more renewable energy. In fact, the LCA analysis performed shows that the production of the battery has a moderate impact, including the effect toxicity while at the end of life, the material and the electrolyte are completely reusable with a small fraction that goes to landfill disposal.},
      language = {en},
      urldate = {2019-07-03},
      booktitle = {Life {Cycle} {Assessment} of {Energy} {Systems} and {Sustainable} {Energy} {Technologies}: {The} {Italian} {Experience}},
      publisher = {Springer International Publishing},
      author = {L’Abbate, Pasqua and Dassisti, Michele and Olabi, Abdul G.},
      editor = {Basosi, Riccardo and Cellura, Maurizio and Longo, Sonia and Parisi, Maria Laura},
      year = {2019},
      doi = {10.1007/978-3-319-93740-3_5},
      keywords = {Electrical energy storage, LCA, Renewable energy sources, Sustainability, Vanadium redox flow battery},
      pages = {61--78}
    }

    M. Dassisti, A. Giovannini, P. Merla, M. Chimienti, and H. Panetto, “An approach to support Industry 4.0 adoption in SMEs using a core-metamodel,” Annual Reviews in Control, vol. 47, pp. 266-274, 2019.
    [Download PDF] [abstract]

    Despite the recent growing interest in the “factory smartness”, still there are only few small and medium enterprises (SMEs) that adopt effective Industry 4.0 (I4.0) solutions. The main reasons can be related to the lack of formalized processes, lack of ICT knowledgeas well as low-cost commercial systems.To cope with these issues, this work focuses on the development and the application of an approach to provide SMEs with a multi-purpose, modular, knowledge-based system: the main aim is to provide a modular and extensible system that can be incrementally implemented without requiring huge initial investments.This system is based on a core design-knowledge meta-model. From this core meta-model, multi-purposes modules can be built: in this paper, we present modules for the traceability support, the AR-powered assembly support, the machine-to-machine control and the data analysis support.

    @article{dassisti_approach_2019,
      title = {An approach to support {Industry} 4.0 adoption in {SMEs} using a core-metamodel},
      volume = {47},
      issn = {1367-5788},
      url = {http://www.sciencedirect.com/science/article/pii/S1367578818301354},
      doi = {10.1016/j.arcontrol.2018.11.001},
      abstract = {Despite the recent growing interest in the “factory smartness”, still there are only few small and medium enterprises (SMEs) that adopt effective Industry 4.0 (I4.0) solutions. The main reasons can be related to the lack of formalized processes, lack of ICT knowledgeas well as low-cost commercial systems.To cope with these issues, this work focuses on the development and the application of an approach to provide SMEs with a multi-purpose, modular, knowledge-based system: the main aim is to provide a modular and extensible system that can be incrementally implemented without requiring huge initial investments.This system is based on a core design-knowledge meta-model. From this core meta-model, multi-purposes modules can be built: in this paper, we present modules for the traceability support, the AR-powered assembly support, the machine-to-machine control and the data analysis support.},
      urldate = {2019-07-03},
      journal = {Annual Reviews in Control},
      author = {Dassisti, Michele and Giovannini, Antonio and Merla, Pasquale and Chimienti, Michela and Panetto, Hervé},
      month = jan,
      year = {2019},
      keywords = {Industry 4.0, Knowledge-based systems, Modular systems, Multi-purpose systems, SME},
      pages = {266--274},
      file = {ScienceDirect Snapshot:C\:\\Users\\stigliano\\Zotero\\storage\\YPPXHCS3\\S1367578818301354.html:text/html}
    }

    C. M. Coman, A. Florescu, and G. Stigliano, “Distributed Sensors Array for Composite Materials Manufacturing Quality Assurance,” in 2019 11th International Symposium on Advanced Topics in Electrical Engineering (ATEE), 2019, pp. 1-6.
    [Download PDF] [abstract]

    The paper describes a cyber-physical approach to resolve the automation of quality and reliability enforcement in a manufacturing environment. The approach is based on an architecture of distributed sensors array connected to a local minicomputer, which further communicates using a secured internet connection with an industry 4.0 facilitator hub. The proposed architecture creates an extensible framework to support multi-domain requirements. The effectiveness of the approach is demonstrated in the case of a composite materials manufacturing installation.

    @inproceedings{coman_distributed_2019,
      title = {Distributed {Sensors} {Array} for {Composite} {Materials} {Manufacturing} {Quality} {Assurance}},
      url = {https://ieeexplore.ieee.org/document/8724867},
      doi = {10.1109/ATEE.2019.8724867},
      abstract = {The paper describes a cyber-physical approach to resolve the automation of quality and reliability enforcement in a manufacturing environment. The approach is based on an architecture of distributed sensors array connected to a local minicomputer, which further communicates using a secured internet connection with an industry 4.0 facilitator hub. The proposed architecture creates an extensible framework to support multi-domain requirements. The effectiveness of the approach is demonstrated in the case of a composite materials manufacturing installation.},
      booktitle = {2019 11th {International} {Symposium} on {Advanced} {Topics} in {Electrical} {Engineering} ({ATEE})},
      author = {Coman, C. M. and Florescu, A. and Stigliano, G.},
      month = mar,
      year = {2019},
      keywords = {composite materials, Composite materials, composite materials manufacturing installation, composite materials manufacturing quality assurance, cyber-physical approach, cyber-physical systems, Cyber-physical systems, Distributed networks, distributed sensors, distributed sensors array, Industry 4.0, industry 4.0 facilitator hub, Internet, local minicomputer, Manufacturing, manufacturing environment, Materials, Monitoring, multidomain requirements, Nanocomposites, Nanosciences and nanotechnologies, production engineering computing, quality assurance, reliability enforcement, secured Internet connection, sensor arrays, Temperature measurement, Temperature sensors},
      pages = {1--6},
      file = {IEEE Xplore Abstract Record:C\:\\Users\\stigliano\\Zotero\\storage\\QNP9PRGT\\8724867.html:text/html}
    }

2018

    Sistemi informatici per la sicurezza dei lavoratori nei cantieri edili, 2018.
    [Download PDF] [abstract]

    La sicurezza dei lavoratori è una delle tematiche più importanti che si trovano ad affrontare le principali imprese di costruzioni, specialmente nel settore edile che, più di ogni altro, necessita di particolari attenzioni al fine di garantire una maggiore prevenzione degli infortuni.

    @misc{noauthor_sistemi_2018,
      title = {Sistemi informatici per la sicurezza dei lavoratori nei cantieri edili},
      url = {http://www.legislazionetecnica.it/4206764/prd/comunicato-azienda/sistemi-informatici-la-sicurezza-dei-lavoratori-nei-cantieri-edili},
      abstract = {La sicurezza dei lavoratori è una delle tematiche più importanti che si trovano ad affrontare le principali imprese di costruzioni, specialmente nel settore edile che, più di ogni altro, necessita di particolari attenzioni al fine di garantire una maggiore prevenzione degli infortuni.},
      language = {it},
      urldate = {2019-07-03},
      journal = {Bollettino di Legislazione Tecnica},
      year = {2018},
      file = {Snapshot:C\:\\Users\\stigliano\\Zotero\\storage\\DNX9C7J4\\sistemi-informatici-la-sicurezza-dei-lavoratori-nei-cantieri-edili.html:text/html}
    }

    M. Dassisti, A. Giovannini, P. Merla, M. Chimienti, and H. Panetto, “Hybrid Production-System Control-Architecture for Smart Manufacturing,” in On the Move to Meaningful Internet Systems. OTM 2017 Workshops, 2018, pp. 5-15.
    [Download PDF] [abstract]

    Highly customized products with shorter life cycles characterize the market today: the smart manufacturing paradigm can answer these needs. In this latter production system context, the interaction between production resources (PRs) can be swiftly adapted to meet both the variety of customers’ needs and the optimization goals. In the scientific literature, several architectural configurations have been devised so far to this aim, namely: hierarchical, heterarchical or hybrid. Whether the hierarchical and heterarchical architectures provide respectively low reactivity and a reduced vision of the optimization opportunities at production system level, the hybrid architectures can mitigate the limit of both the previous architectures. However, no hybrid architecture can ensure all PRs are aware of how orienting their behavior to achieve the optimization goal of the manufacturing system with a minimal computational effort. In this paper, a new “hybrid architecture” is proposed to meet this goal. At each order entry, this architecture allows the PRs to be dynamically grouped. Each group has a supervisor, i.e. the optimizer, that has the responsibility: (1) to monitor the tasks on all the resources, (2) to compute the optimal manufacturing parameters and (3) to provide the optimization results to the resources of the group. A software prototype was developed to test the new architecture design in a simulated flow-shop and in a simplified job shop production.

    @inproceedings{dassisti_hybrid_2018,
      series = {Lecture {Notes} in {Computer} {Science}},
      title = {Hybrid {Production}-{System} {Control}-{Architecture} for {Smart} {Manufacturing}},
      isbn = {978-3-319-73805-5},
      url = {https://link.springer.com/chapter/10.1007/978-3-319-73805-5_1},
      abstract = {Highly customized products with shorter life cycles characterize the market today: the smart manufacturing paradigm can answer these needs. In this latter production system context, the interaction between production resources (PRs) can be swiftly adapted to meet both the variety of customers’ needs and the optimization goals. In the scientific literature, several architectural configurations have been devised so far to this aim, namely: hierarchical, heterarchical or hybrid. Whether the hierarchical and heterarchical architectures provide respectively low reactivity and a reduced vision of the optimization opportunities at production system level, the hybrid architectures can mitigate the limit of both the previous architectures. However, no hybrid architecture can ensure all PRs are aware of how orienting their behavior to achieve the optimization goal of the manufacturing system with a minimal computational effort. In this paper, a new “hybrid architecture” is proposed to meet this goal. At each order entry, this architecture allows the PRs to be dynamically grouped. Each group has a supervisor, i.e. the optimizer, that has the responsibility: (1) to monitor the tasks on all the resources, (2) to compute the optimal manufacturing parameters and (3) to provide the optimization results to the resources of the group. A software prototype was developed to test the new architecture design in a simulated flow-shop and in a simplified job shop production.},
      language = {en},
      booktitle = {On the {Move} to {Meaningful} {Internet} {Systems}. {OTM} 2017 {Workshops}},
      publisher = {Springer International Publishing},
      author = {Dassisti, Michele and Giovannini, Antonio and Merla, Pasquale and Chimienti, Michela and Panetto, Hervé},
      editor = {Debruyne, Christophe and Panetto, Hervé and Weichhart, Georg and Bollen, Peter and Ciuciu, Ioana and Vidal, Maria-Esther and Meersman, Robert},
      year = {2018},
      keywords = {Cyber physical production system, Factory automation, Hybrid control architecture, Intelligent manufacturing system, Reconfigurable manufacturing system},
      pages = {5--15}
    }

    M. Dassisti, A. Giovannini, P. Merla, M. Chimienti, and H. Panetto, “An approach to support I4.0 adoption in SMEs: a core-metamodel and applications,” IFAC-PapersOnLine, vol. 51, iss. 11, pp. 42-47, 2018.
    [Download PDF] [abstract]

    Despite the recent growing interest in the “factory smartness”, still there are few small and medium enterprises (SMEs) that adopt effective I4.0 solutions. The main reasons can be related to the lack of formalized processes, lack of ICT knowledge as well as low-cost commercial systems. To cope with these issues, this work focuses on the development and the application of an approach to provide SMEs with a multi-purpose, modular, knowledge-based system: the main aim is to provide a modular and extensible system that can be incrementally implemented without requiring a huge initial investments. This system is based on a core design-knowledge metamodel. From this core metamodel, multi-purposes modules can be built: in this paper, we present modules for the traceability support, the AR-powered assembly support, the machine-to-machine control and the data analysis support.

    @article{dassisti_approach_2018,
      series = {16th {IFAC} {Symposium} on {Information} {Control} {Problems} in {Manufacturing} {INCOM} 2018},
      title = {An approach to support {I}4.0 adoption in {SMEs}: a core-metamodel and applications},
      volume = {51},
      issn = {2405-8963},
      shorttitle = {An approach to support {I}4.0 adoption in {SMEs}},
      url = {http://www.sciencedirect.com/science/article/pii/S2405896318313569},
      doi = {10.1016/j.ifacol.2018.08.232},
      abstract = {Despite the recent growing interest in the “factory smartness”, still there are few small and medium enterprises (SMEs) that adopt effective I4.0 solutions. The main reasons can be related to the lack of formalized processes, lack of ICT knowledge as well as low-cost commercial systems. To cope with these issues, this work focuses on the development and the application of an approach to provide SMEs with a multi-purpose, modular, knowledge-based system: the main aim is to provide a modular and extensible system that can be incrementally implemented without requiring a huge initial investments. This system is based on a core design-knowledge metamodel. From this core metamodel, multi-purposes modules can be built: in this paper, we present modules for the traceability support, the AR-powered assembly support, the machine-to-machine control and the data analysis support.},
      number = {11},
      urldate = {2019-07-03},
      journal = {IFAC-PapersOnLine},
      author = {Dassisti, Michele and Giovannini, Antonio and Merla, Pasquale and Chimienti, Michela and Panetto, Hervé},
      month = jan,
      year = {2018},
      keywords = {Industry 4.0, knowledge-based systems, modular systems, multi-purpose systems, SME},
      pages = {42--47},
      file = {ScienceDirect Full Text PDF:C\:\\Users\\stigliano\\Zotero\\storage\\L7R59P3U\\Dassisti et al. - 2018 - An approach to support I4.0 adoption in SMEs a co.pdf:application/pdf;ScienceDirect Snapshot:C\:\\Users\\stigliano\\Zotero\\storage\\GDU3TRKH\\S2405896318313569.html:text/html}
    }

2017

    A. Pellegrini and P. D. Sanzo, “On the Optimization of Collaborative KerbsideWaste Collection,” Wseas Transactions On Environment And Development, vol. 13, 2017.
    [Download PDF] [abstract]

    In this paper, we target collaborative kerbside collection from a planning and real-time monitoring point of view. This is a non-trivial problem, where several vehicles are set on streets to finish a task—the collection of all waste—by a certain maximum amount of time. While deciding upon a collaborative strategy is a well-studied and complex problem by itself, we focus as well on re-planning, whenever live data collected by the vehicles suggest that the current scenario has deviated from the provisional plan, due to changes in external environmental factors. To this end, we propose a global mission-management architecture, which tries to optimize at once the time required to finish the waste collection, the distance traveled by the vehicles, the amount of fuel burnt (accounting as well for idle time at collection points), and the impact of pollutants emissions.

    @article{pellegrini_optimization_2017,
      title = {On the {Optimization} of {Collaborative} {KerbsideWaste} {Collection}},
      volume = {13},
      url = {http://www.wseas.org/multimedia/journals/environment/2017/a185815-046.php},
      abstract = {In this paper, we target collaborative kerbside collection from a planning and real-time monitoring point of view. This is a non-trivial problem, where several vehicles are set on streets to finish a task—the collection of all waste—by a certain maximum amount of time. While deciding upon a collaborative strategy is a well-studied and complex problem by itself, we focus as well on re-planning, whenever live data collected by the vehicles suggest that the current scenario has deviated from the provisional plan, due to changes in external environmental factors. To this end, we propose a global mission-management architecture, which tries to optimize at once the time required to finish the waste collection, the distance traveled by the vehicles, the amount of fuel burnt (accounting as well for idle time at collection points), and the impact of pollutants emissions.},
      language = {EN},
      journal = {Wseas Transactions On Environment And Development},
      author = {Pellegrini, Alessandro and Sanzo, Pierangelo Di},
      year = {2017},
      file = {Full Text PDF:C\:\\Users\\stigliano\\Zotero\\storage\\LL4KBYC7\\Pellegrini e Sanzo - 2017 - On the Optimization of Collaborative KerbsideWaste.pdf:application/pdf;Snapshot:C\:\\Users\\stigliano\\Zotero\\storage\\ITTE29Q6\\a185815-046.html:text/html}
    }

    G. Uva, M. Dassisti, F. Iannone, G. Florio, F. Maddalena, M. Ruta, A. Grieco, I. Giannoccaro, V. Albino, M. Lezoche, A. Aubry, A. Giovannini, A. Buscicchio, Y. Eslami, and V. Leggieri, “Modelling Framework for Sustainable Co-management of Multi-purpose Exhibition Systems: The “Fiera del Levante” Case,” Procedia Engineering, vol. 180, pp. 812-821, 2017.
    [Download PDF] [abstract]

    An exhibition system is typically a physical open space made of several buildings devoted to performing demonstrations or social activities. Several examples of exhibition systems can be found word wide. The management of these spaces, even in presence of a limited number of activities, requires significant efforts: safety, welcome, merchandising, public services, etc. Nowadays, the new trend is to offer multiple, contemporary use of exhibition spaces, allowing exhibition events and regular social activities (commercial, cultural, etc.) to be dynamically intertwined, either to endeavor the huge economic investments behind infrastructures or to increase the attractiveness of the exhibition activities. This is the case of “Fiera del Levante”, one of the oldest exhibitions located in a fascinating central area on the seaside of the city of Bari – Italy. Here, multiple social scopes, such as multi-exhibitions and contemporary social activities related to public offices, restaurants and entertainment, live together. This is an almost unique setting, which makes Fiera del Levante (FdL) a complex system and makes the management of the exhibition a challenging co-management task. The paper deals with the development and demonstration of a complex-system modeling framework for the decision support of the co-management of Fiera del Levante exhibition system, taking into account the interaction both physical aspects (building assets, infrastructure, equipment, fittings, …) and intangible aspects (permanent and temporary events, management and business activities, etc) and, of course, considering as a main input the needs of the different stakeholders involved.

    @article{uva_modelling_2017,
      series = {International {High}-{Performance} {Built} {Environment} {Conference} – {A} {Sustainable} {Built} {Environment} {Conference} 2016 {Series} ({SBE}16), {iHBE} 2016},
      title = {Modelling {Framework} for {Sustainable} {Co}-management of {Multi}-purpose {Exhibition} {Systems}: {The} “{Fiera} del {Levante}” {Case}},
      volume = {180},
      issn = {1877-7058},
      shorttitle = {Modelling {Framework} for {Sustainable} {Co}-management of {Multi}-purpose {Exhibition} {Systems}},
      url = {http://www.sciencedirect.com/science/article/pii/S1877705817317496},
      doi = {10.1016/j.proeng.2017.04.242},
      abstract = {An exhibition system is typically a physical open space made of several buildings devoted to performing demonstrations or social activities. Several examples of exhibition systems can be found word wide. The management of these spaces, even in presence of a limited number of activities, requires significant efforts: safety, welcome, merchandising, public services, etc. Nowadays, the new trend is to offer multiple, contemporary use of exhibition spaces, allowing exhibition events and regular social activities (commercial, cultural, etc.) to be dynamically intertwined, either to endeavor the huge economic investments behind infrastructures or to increase the attractiveness of the exhibition activities.
    This is the case of “Fiera del Levante”, one of the oldest exhibitions located in a fascinating central area on the seaside of the city of Bari - Italy. Here, multiple social scopes, such as multi-exhibitions and contemporary social activities related to public offices, restaurants and entertainment, live together. This is an almost unique setting, which makes Fiera del Levante (FdL) a complex system and makes the management of the exhibition a challenging co-management task.
    The paper deals with the development and demonstration of a complex-system modeling framework for the decision support of the co-management of Fiera del Levante exhibition system, taking into account the interaction both physical aspects (building assets, infrastructure, equipment, fittings, …) and intangible aspects (permanent and temporary events, management and business activities, etc) and, of course, considering as a main input the needs of the different stakeholders involved.},
      journal = {Procedia Engineering},
      author = {Uva, Giuseppina and Dassisti, Michele and Iannone, Francesco and Florio, Giuseppe and Maddalena, Franco and Ruta, Michele and Grieco, Alfredo and Giannoccaro, Ilaria and Albino, Vito and Lezoche, Mario and Aubry, Alexis and Giovannini, Antonio and Buscicchio, Alessandro and Eslami, Yasamine and Leggieri, Valeria},
      year = {2017},
      keywords = {BIM, building performances, co-management, Complex system, decision support, existing building assets, vulnerability analysis},
      pages = {812--821},
      file = {ScienceDirect Full Text PDF:C\:\\Users\\stigliano\\Zotero\\storage\\ASSUGW2S\\Uva et al. - 2017 - Modelling Framework for Sustainable Co-management .pdf:application/pdf;ScienceDirect Snapshot:C\:\\Users\\stigliano\\Zotero\\storage\\X7PHEKZP\\S1877705817317496.html:text/html}
    }

    M. Dassisti, H. Panetto, M. Lezoche, P. Merla, C. Semeraro, A. Giovannini, and M. Chimienti, “Industry 4.0 paradigm: The viewpoint of the small and medium enterprises,” in 7th International Conference on Information Society and Technology, ICIST 2017, Kopaonik, Serbia, 2017, pp. 50-54.
    [Download PDF] [abstract]

    The pervasive diffusion of Information and Communication technologies (ICT) and automation technologies are the prerequisite for the preconized fourth industrial revolution: the Industry 4.0 (I4.0). Despite the economical efforts of several governments all over the world, still there are few companies, especially small and medium enterprises (SMEs), that adopt or intend to adopt in the near future I4.0 solutions. This work focus on key issues for implementing the I4.0 solutions in SMEs by using a specific case example as a test bench of an Italian small manufacturing company. Requirements and constraints derived from the field experience are generalised to provide a clear view of the profound potentialities and difficulties of the first industrial revolution announced instead of being historically recognised. A preliminary classification is then provided in view to start conceiving a library of Industry 4.0 formal patterns to identify the maturity of a SME for deploying Industry 4.0 concepts and technologies.

    @inproceedings{dassisti_industry_2017,
      address = {Kopaonik, Serbia},
      series = {{ICIST} 2017 {Proceedings}},
      title = {Industry 4.0 paradigm: {The} viewpoint of the small and medium enterprises},
      volume = {1},
      shorttitle = {Industry 4.0 paradigm},
      url = {https://hal.archives-ouvertes.fr/hal-01526397},
      abstract = {The pervasive diffusion of Information and Communication technologies (ICT) and automation technologies are the prerequisite for the preconized fourth industrial revolution: the Industry 4.0 (I4.0). Despite the economical efforts of several governments all over the world, still there are few companies, especially small and medium enterprises (SMEs), that adopt or intend to adopt in the near future I4.0 solutions. This work focus on key issues for implementing the I4.0 solutions in SMEs by using a specific case example as a test bench of an Italian small manufacturing company. Requirements and constraints derived from the field experience are generalised to provide a clear view of the profound potentialities and difficulties of the first industrial revolution announced instead of being historically recognised. A preliminary classification is then provided in view to start conceiving a library of Industry 4.0 formal patterns to identify the maturity of a SME for deploying Industry 4.0 concepts and technologies.},
      booktitle = {7th {International} {Conference} on {Information} {Society} and {Technology}, {ICIST} 2017},
      author = {Dassisti, Michele and Panetto, Hervé and Lezoche, Mario and Merla, Pasquale and Semeraro, Concetta and Giovannini, Antonio and Chimienti, Michela},
      month = mar,
      year = {2017},
      keywords = {Cyber Physical Systems, Industry 40, Small and Medium Enterprises, Smart Systems Interoperability},
      pages = {50--54},
      file = {HAL PDF Full Text:C\:\\Users\\stigliano\\Zotero\\storage\\7T64RK7X\\Dassisti et al. - 2017 - Industry 4.0 paradigm The viewpoint of the small .pdf:application/pdf}
    }

    M. Ianni, A. Pellegrini, and F. Quaglia, “A Wait-Free Multi-word Atomic (1,N) Register for Large-Scale Data Sharing on Multi-core Machines,” in 2017 IEEE International Conference on Cluster Computing (CLUSTER), 2017, pp. 188-192.
    [Download PDF] [abstract]

    We present a multi-word atomic (1,N) register for multi-core machines exploiting Read-Modify-Write (RMW) instructions to coordinate the writer and the readers in a wait-free manner. Our proposal, called Anonymous Readers Counting (ARC), enables large-scale data sharing by admitting up to 2\textasciicircum32-2 concurrent readers on off-the-shelf 64-bit machines, as opposed to the most advanced RMW-based approach which is limited to 58 readers. Further, ARC avoids multiple copies of the register content while accessing it-this affects classical register’s algorithms based on atomic read/write operations on single words. Thus, ARC allows for higher scalability with respect to the register size.

    @inproceedings{ianni_wait-free_2017,
      title = {A {Wait}-{Free} {Multi}-word {Atomic} (1,{N}) {Register} for {Large}-{Scale} {Data} {Sharing} on {Multi}-core {Machines}},
      url = {https://ieeexplore.ieee.org/document/8048930},
      doi = {10.1109/CLUSTER.2017.84},
      abstract = {We present a multi-word atomic (1,N) register for multi-core machines exploiting Read-Modify-Write (RMW) instructions to coordinate the writer and the readers in a wait-free manner. Our proposal, called Anonymous Readers Counting (ARC), enables large-scale data sharing by admitting up to 2{\textasciicircum}32-2 concurrent readers on off-the-shelf 64-bit machines, as opposed to the most advanced RMW-based approach which is limited to 58 readers. Further, ARC avoids multiple copies of the register content while accessing it-this affects classical register's algorithms based on atomic read/write operations on single words. Thus, ARC allows for higher scalability with respect to the register size.},
      booktitle = {2017 {IEEE} {International} {Conference} on {Cluster} {Computing} ({CLUSTER})},
      author = {Ianni, M. and Pellegrini, A. and Quaglia, F.},
      month = sep,
      year = {2017},
      keywords = {Anonymous Readers Counting, ARC, atomic registers, concurrency (computers), concurrent readers, Conferences, data sharing, DH-HEMTs, flip-flops, multi-core computing, multicore shared-memory machines, multiword atomic register, parallel architectures, Read-Modify-Write instructions, shared memory systems, wait-free multiword register, wait-free synchronization},
      pages = {188--192},
      file = {IEEE Xplore Abstract Record:C\:\\Users\\stigliano\\Zotero\\storage\\Y9EPIQJD\\8048930.html:text/html;Submitted Version:C\:\\Users\\stigliano\\Zotero\\storage\\L2Q5E769\\Ianni et al. - 2017 - A Wait-Free Multi-word Atomic (1,N) Register for L.pdf:application/pdf}
    }

2016

    M. Dassisti, F. Intini, M. Chimienti, and G. Starace, “Thermography-enhanced LCA (Life Cycle Assessment) for manufacturing sustainability assessment. The case study of an HDPE (High Density Polyethylene) net company in Italy,” Energy, p. –, 2016.
    [Download PDF] [abstract]

    Abstract LCA (Life Cycle Assessment) is nowadays a commonly implemented approach for evaluating resource consumptions and for benchmarking purposes. It suffers some limitations, mainly related to its assumptions on linear resource -consumption behaviour as well as on the non-context specific data. On the other hand, it is an extremely powerful tool for decision-making support in the sustainability assessment of manufacturing processes, providing its well-structured approach and widely accepted procedure. Deepening the assessment capabilities of such a tool is thus an important opportunity. This paper is intended to build upon this concept by proposing an improved approach consisting in supplying in-process information concerning energy consumption and other process state conditions through thermography. The case of an Italian industrial company producing \HDPE\ (High Density Polyethylene) nets for agriculture is taken as test bed case to show pros and cons of this idea. Actually, this approach resulted into a better assessment of the sustainability profile of the whole production process in terms of energy consumptions and environmental impacts. This in turn became an updated management tool for real-time decision making closer to the real conditions.

    @article{dassisti_thermography-enhanced_2016,
      title = {Thermography-enhanced {LCA} ({Life} {Cycle} {Assessment}) for manufacturing sustainability assessment. {The} case study of an {HDPE} ({High} {Density} {Polyethylene}) net company in {Italy}},
      issn = {0360-5442},
      url = {http://www.sciencedirect.com/science/article/pii/S0360544216000645},
      doi = {http://dx.doi.org/10.1016/j.energy.2016.01.043},
      abstract = {Abstract LCA (Life Cycle Assessment) is nowadays a commonly implemented approach for evaluating resource consumptions and for benchmarking purposes. It suffers some limitations, mainly related to its assumptions on linear resource -consumption behaviour as well as on the non-context specific data. On the other hand, it is an extremely powerful tool for decision-making support in the sustainability assessment of manufacturing processes, providing its well-structured approach and widely accepted procedure. Deepening the assessment capabilities of such a tool is thus an important opportunity. This paper is intended to build upon this concept by proposing an improved approach consisting in supplying in-process information concerning energy consumption and other process state conditions through thermography. The case of an Italian industrial company producing \{HDPE\} (High Density Polyethylene) nets for agriculture is taken as test bed case to show pros and cons of this idea. Actually, this approach resulted into a better assessment of the sustainability profile of the whole production process in terms of energy consumptions and environmental impacts. This in turn became an updated management tool for real-time decision making closer to the real conditions.},
      journal = {Energy},
      author = {Dassisti, Michele and Intini, Francesca and Chimienti, Michela and Starace, Giuseppe},
      year = {2016},
      keywords = {Agriculture},
      pages = {--}
    }

    M. Dassisti, P. Mastrorilli, A. Rizzuti, G. Cozzolino, M. Chimienti, A. G. Olabi, F. Matera, and A. Carbone, “Vanadium: A Transition Metal for Sustainable Energy Storing in Redox Flow Batteries,” in Reference Module in Materials Science and Materials Engineering, Elsevier, 2016.
    [Download PDF] [abstract]

    Storage systems are becoming one of the most critical components in the scenario of energy, mainly due to the penetration and deployment of renewable sources. All-vanadium redox-flow batteries (RFB), in combination with a wide range of renewable energy sources, are one of the most promising technologies as an electrochemical energy storage system because of the independence of energy and power rating, fast response, room temperature operation, extremely long life, and low environmental impact. This article reviews the main features and applications of vanadium as a key element of RFB and provides a simple explanation of its properties and use as a means of energy storage.

    @incollection{dassisti_vanadium:_2016,
      title = {Vanadium: {A} {Transition} {Metal} for {Sustainable} {Energy} {Storing} in {Redox} {Flow} {Batteries}},
      isbn = {978-0-12-803581-8},
      shorttitle = {Vanadium},
      url = {http://www.sciencedirect.com/science/article/pii/B9780128035818040078},
      abstract = {Storage systems are becoming one of the most critical components in the scenario of energy, mainly due to the penetration and deployment of renewable sources. All-vanadium redox-flow batteries (RFB), in combination with a wide range of renewable energy sources, are one of the most promising technologies as an electrochemical energy storage system because of the independence of energy and power rating, fast response, room temperature operation, extremely long life, and low environmental impact. This article reviews the main features and applications of vanadium as a key element of RFB and provides a simple explanation of its properties and use as a means of energy storage.},
      urldate = {2016-06-15},
      booktitle = {Reference {Module} in {Materials} {Science} and {Materials} {Engineering}},
      publisher = {Elsevier},
      author = {Dassisti, Michele and Mastrorilli, Pietro and Rizzuti, Antonino and Cozzolino, Gennaro and Chimienti, Michela and Olabi, A. G. and Matera, F. and Carbone, A.},
      year = {2016},
      keywords = {sustainability, Bipolar plate, Carbon felt, Electrochemical energy storage, Energy storage, Ion exchange membrane, Redox reaction, Redox-flow battery, Renewable energy sources, Secondary battery, Vanadium},
      file = {ScienceDirect Snapshot:C\:\\Users\\stigliano\\Zotero\\storage\\99D7TZRB\\B9780128035818040078.html:text/html}
    }

    M. Dassisti, G. Cozzolino, M. Chimienti, A. Rizzuti, P. Mastrorilli, and P. L’Abbate, “Sustainability of vanadium redox-flow batteries: Benchmarking electrolyte synthesis procedures,” International Journal of Hydrogen Energy, p. –, 2016.
    [Download PDF] [abstract]

    Abstract This work focuses on the assessment, in terms of effectiveness, feasibility and sustainability, of three different procedures for the synthesis of vanadium-based mixed-acid electrolytes to be used in vanadium redox-flow batteries (VRFBs). Procedures considered consisted in: a) the mere mixing of suitable vanadium precursors (Electrolyte A); b) the chemical reduction of \V2O5\ by oxalic acid (Electrolyte B); c) the electrochemical reduction of \V2O5\ using a home-made “H-shaped” electrolysis cell (Electrolyte C). \VRFB\ properties such as energy efficiency, mean charge–discharge voltages, cycle duration as well as stability and conductivity of the electrolyte were analysed and compared with the state-of-the-art. Experimental tests carried out on a laboratory scale \VRFB\ battery comprised: thermal stability test, cyclic voltammetry, electrochemical impedance spectroscopy measurements and charge–discharge tests. A Life Cycle Assessment of the three electrolytes is also presented for benchmarking purposes.

    @article{dassisti_sustainability_2016,
      title = {Sustainability of vanadium redox-flow batteries: {Benchmarking} electrolyte synthesis procedures},
      issn = {0360-3199},
      url = {http://www.sciencedirect.com/science/article/pii/S0360319916300659},
      doi = {http://dx.doi.org/10.1016/j.ijhydene.2016.05.197},
      abstract = {Abstract This work focuses on the assessment, in terms of effectiveness, feasibility and sustainability, of three different procedures for the synthesis of vanadium-based mixed-acid electrolytes to be used in vanadium redox-flow batteries (VRFBs). Procedures considered consisted in: a) the mere mixing of suitable vanadium precursors (Electrolyte A); b) the chemical reduction of \{V2O5\} by oxalic acid (Electrolyte B); c) the electrochemical reduction of \{V2O5\} using a home-made “H-shaped” electrolysis cell (Electrolyte C). \{VRFB\} properties such as energy efficiency, mean charge–discharge voltages, cycle duration as well as stability and conductivity of the electrolyte were analysed and compared with the state-of-the-art. Experimental tests carried out on a laboratory scale \{VRFB\} battery comprised: thermal stability test, cyclic voltammetry, electrochemical impedance spectroscopy measurements and charge–discharge tests. A Life Cycle Assessment of the three electrolytes is also presented for benchmarking purposes.},
      journal = {International Journal of Hydrogen Energy},
      author = {Dassisti, M. and Cozzolino, G. and Chimienti, M. and Rizzuti, A. and Mastrorilli, P. and L'Abbate, P.},
      year = {2016},
      keywords = {sustainability},
      pages = {--}
    }

2015

    M. Dassisti, P. Mastrorilli, A. Rizzuti, P. L’Abbate, G. Cozzolino, and M. Chimienti, “LCA of in-house produced small-sized vanadium redox-flow battery,” Proceedings of SEEP2015, 2015.
    [abstract]

    Storage systems are becoming one of the most critical components in the energy management, mainly due to the discontinuity characteristics of renewable sources. Redox flow batteries (RFB) are one of the most promising technologies as electrochemical energy storage system, because of the independence of energy and power rating, fast response, room temperature operation, and extremely long life. It is susceptible of a strong increase of its use in the next future, in particular in combination to a wide range of renewable energy sources (e.g. solar, eolic, tidal). Key factors such as the energy density and the operating temperature range depend on the properties of the battery electrolyte. This promising feature brings new questions to solve: the sustainability is one of the most critical to be faced. In this work, the vanadium electrolyte environmental sustainability is analyzed. Electrolyte is one of the most important component of the battery, having a strong impact particularly on its use. A comparative LCA analysis is performed to appreciate its potentialities for domestic use under safety conditions, providing some useful indication on its drawbacks.

    @article{dassisti_lca_2015,
      title = {{LCA} of in-house produced small-sized vanadium redox-flow battery},
      abstract = {Storage systems are becoming one of the most critical components in the energy management, mainly due to the discontinuity characteristics of renewable sources. Redox flow batteries (RFB) are one of the most promising technologies as electrochemical energy storage system, because of the independence of energy and power rating, fast response, room temperature operation, and extremely long life. It is susceptible of a strong increase of its use in the next future, in particular in combination to a wide range of renewable energy sources (e.g. solar, eolic, tidal). Key factors such as the energy density and the operating temperature range depend on the properties of the battery electrolyte. This promising feature brings new questions to solve: the sustainability is one of the most critical to be faced. In this work, the vanadium electrolyte environmental sustainability is analyzed. Electrolyte is one of the most important component of the battery, having a strong impact particularly on its use. A comparative LCA analysis is performed to appreciate its potentialities for domestic use under safety conditions, providing some useful indication on its drawbacks.},
      journal = {Proceedings of SEEP2015},
      author = {Dassisti, Michele and Mastrorilli, Piero and Rizzuti, Antonino and L'Abbate, Pasqua and Cozzolino, Gennaro and Chimienti, Michela},
      year = {2015}
    }

2014

    S. Bruno, M. Dassisti M., M. La Scala, M. Chimienti, C. Cignali, and E. Palmisani, “Predictive Dispatch Across Time of Hybrid Isolated Power Systems,” IEEE Transactions on Sustainable Energy, vol. PP, iss. 99, p. 1, 2014.
    [Download PDF] [abstract]

    The paper proposes a methodology for the optimal dispatch of energy sources in hybrid and isolated energy systems. The proposed approach is based on the formulation and solution of a non-linear discrete optimization problem aimed at optimizing input and output time trajectories for a set of combined generating and storage technologies. Loads and interruptible loads are among controlled variables and are modeled according to their interruption costs. The approach is general enough to be applied to any hybrid system configuration and was developed having in mind complex hybrid system architectures comprising several competing storage technologies (battery, pumping and hydrogen). Test results are aimed at showing the feasibility of the proposed methodology, comparing optimal trajectories to suboptimal system behavior given by load-following strategies.

    @article{bruno_predictive_2014,
      title = {Predictive {Dispatch} {Across} {Time} of {Hybrid} {Isolated} {Power} {Systems}},
      volume = {PP},
      url = {http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=6740841},
      doi = {10.1109/TSTE.2013.2295428},
      abstract = {The paper proposes a methodology for the optimal dispatch of energy sources in hybrid and isolated energy systems. The proposed approach is based on the formulation and solution of a non-linear discrete optimization problem aimed at optimizing input and output time trajectories for a set of combined generating and storage technologies. Loads and interruptible loads are among controlled variables and are modeled according to their interruption costs. The approach is general enough to be applied to any hybrid system configuration and was developed having in mind complex hybrid system architectures comprising several competing storage technologies (battery, pumping and hydrogen). Test results are aimed at showing the feasibility of the proposed methodology, comparing optimal trajectories to suboptimal system behavior given by load-following strategies.},
      number = {99},
      journal = {IEEE Transactions on Sustainable Energy},
      author = {Bruno, Sergio and Dassisti, M., Michele and La Scala, Massimo and Chimienti, Michela and Cignali, Claudio and Palmisani, Ezio},
      year = {2014},
      pages = {1},
      annote = {Manuscript ID: TSTE-00196-2013 IEEE Transactions on Sustainable Energy}
    }

    S. Bruno, M. Dassisti, M. La Scala, M. Chimienti, G. Stigliano, and E. Palmisani, “Managing Networked Hybrid-Energy Systems: a Predictive Dispatch Approach,” in The 19th World Congress of the International Federation of Automatic Control, 2014.
    [Download PDF] [abstract]

    Energy source management in networked enterprises is one of the crucial tasks of recent times: different energy requests as well as distribution among node-enterprise due to variety of production loads and duties exchanges may in fact bring to un-optimal energetic balance of the network. The idea of optimal balancing of energy sources within a set of nodes of an enterprise network, even though temporarily cooperating, by endeavoring a systemic perspective is the rationale of the present paper. A methodology for the optimal dispatch of energy sources in hybrid as well as isolated energy systems has been devised to this aim. The core of the methodology is based on the formulation and solution of a non-linear discrete optimization problem aimed at optimizing input and output time trajectories for a set of combined power-generation and storage technologies. The proposed approach is general enough to be susceptible of implementation in any network of enterprises to optimize the energy dispatching.

    @inproceedings{bruno_managing_2014,
      title = {Managing {Networked} {Hybrid}-{Energy} {Systems}: a {Predictive} {Dispatch} {Approach}},
      url = {http://tc.ifac-control.org/5/3/events/wc-2014},
      abstract = {Energy source management in networked enterprises is one of the crucial tasks of recent times: different energy requests as well as distribution among node-enterprise due to variety of production loads and duties exchanges may in fact bring to un-optimal energetic balance of the network. The idea of optimal balancing of energy sources within a set of nodes of an enterprise network, even though temporarily cooperating, by endeavoring a systemic perspective is the rationale of the present paper. A methodology for the optimal dispatch of energy sources in hybrid as well as isolated energy systems has been devised to this aim. The core of the methodology is based on the formulation and solution of a non-linear discrete optimization problem aimed at optimizing input and output time trajectories for a set of combined power-generation and storage technologies. The proposed approach is general enough to be susceptible of implementation in any network of enterprises to optimize the energy dispatching.},
      booktitle = {The 19th {World} {Congress} of the {International} {Federation} of {Automatic} {Control}},
      author = {Bruno, Sergio and Dassisti, Michele and La Scala, Massimo and Chimienti, Michela and Stigliano, Giambattista and Palmisani, Ezio},
      year = {2014},
      annote = {Cape Town, South Africa {\textbackslash}textbar 24-29 August 2014}
    }

    G. Pirlo, M. Chimienti, M. Dassisti, D. Impedovo, and A. Galiano, “A Layout-Analysis Based System for Document Image Retrieval,” Mondo Digitale, vol. XIII, iss. 49, 2014.
    [Download PDF] [abstract]

    This paper presents new system for document image retrieval, based on layout-analysis. The system, that is well suited for commercial form retrieval, uses Radon Transform for layout description and Dynamic Time Warping for document image matching. The experimental results, that were conducted using real and simulated data sets, demonstrate the proposed approach is effective and robust with respect to different classes of commercial forms and shifted/rotated document images.

    @article{pirlo_layout-analysis_2014,
      title = {A {Layout}-{Analysis} {Based} {System} for {Document} {Image} {Retrieval}},
      volume = {XIII},
      url = {http://mondodigitale.aicanet.net/2014-1/augmented_reality_e_biometrics/03_PIRLO.pdf},
      abstract = {This paper presents new system for document image retrieval, based on layout-analysis. The system, that is well suited for commercial form retrieval, uses Radon Transform for layout description and Dynamic Time Warping for document image matching. The experimental results, that were conducted using real and simulated data sets, demonstrate the proposed approach is effective and robust with respect to different classes of commercial forms and shifted/rotated document images.},
      number = {49},
      journal = {Mondo Digitale},
      author = {Pirlo, Giuseppe and Chimienti, Michela and Dassisti, Michele and Impedovo, Donato and Galiano, Angelo},
      year = {2014}
    }

    P. Guarino, G. L. Cascella, S. Stasi, M. Dassisti, and M. Chimienti, “Solar-Powered Ultra-Light Aircrafts: An Overview on Power System Technology,” International Journal of Energy, vol. 8, pp. 43-52, 2014.
    [Download PDF] [abstract]

    This paper surveys the proposed solutions for the design of an ultra-light Unmanned Aerial Vehicles, showing the most recent advances in technology for the power system of the design. In particular this paper focuses on the electrical components of the project, showing a brief review of the single objects and their applicability for the design of a Solar-Powered Airplane. The aim of this paper is to collect all the useful information for people who wants to begin a design process for an ultra light aerial vehicle with electric propulsion system and a solar energy conversion source, giving basic information about the state of the art of the UAV projects and the requirements for the power system management elements.

    @article{guarino_solar-powered_2014,
      title = {Solar-{Powered} {Ultra}-{Light} {Aircrafts}: {An} {Overview} on {Power} {System} {Technology}},
      volume = {8},
      url = {http://www.naun.org/main/NAUN/energy/2014/a142009-110.pdf},
      abstract = {This paper surveys the proposed solutions for the design of an ultra-light Unmanned Aerial Vehicles, showing the most recent advances in technology for the power system of the design. In particular this paper focuses on the electrical components of the project, showing a brief review of the single objects and their applicability for the design of a Solar-Powered Airplane. The aim of this paper is to collect all the useful information for people who wants to begin a design process for an ultra light aerial vehicle with electric propulsion system and a solar energy conversion source, giving basic information about the state of the art of the UAV projects and the requirements for the power system management elements.},
      journal = {International Journal of Energy},
      author = {Guarino, Paolo and Cascella, Giuseppe Leonardo and Stasi, Silvio and Dassisti, Michele and Chimienti, Michela},
      year = {2014},
      pages = {43--52}
    }

    M. Potenza, F. Naccarato, A. De Risi, and G. Stigliano, “Numerical Optimization of an Organic Rankine Cycle Scheme for Co-generation,” International Journal of Renewable Energy Research, vol. 4, iss. 2, pp. 508-518, 2014.
    [Download PDF] [abstract]

    The aim of the present work was the optimization of a small size Organic Rankine Cycle (ORC) system powered by a linear Parabolic Trough Collector (PTC) solar field; a numerical model code was developed on purpose. In the proposed scheme the solar energy is collected by a newly designed low cost PTC of 20m2 with a single tracking axis and is concentrated on an opaque pipe collector in which flows as thermal fluid Therminol� 66 oil. An oil-free scroll expander coupled with a 2kW electrical generator is used to convert fluid energy into electrical energy. Cogeneration is performed by accumulating the waste in a double effect tank for domestic hot water (DHW) and heating. The use of cogeneration improves the global efficiency of the system from about 12\% up to 30\%. The numerical model implements the primary and secondary circuit as well as a detailed model of the PTC and the scroll expander. Real weather data of Brindisi (Italy) is considered to estimate and to optimize the performance of the plant. The system control has been optimized with the numerical model based on a multi objective genetic algorithm to increase the performance of the expander with the development of energy-save strategies.

    @article{potenza_numerical_2014,
      title = {Numerical {Optimization} of an {Organic} {Rankine} {Cycle} {Scheme} for {Co}-generation},
      volume = {4},
      url = {http://www.ijrer.org/ijrer/index.php/ijrer/article/viewFile/1300/pdf},
      doi = {Online ISSN: 1309-0127},
      abstract = {The aim of the present work was the optimization of a small size Organic Rankine Cycle (ORC) system powered by a linear Parabolic Trough Collector (PTC) solar field; a numerical model code was developed on purpose. In the proposed scheme the solar energy is collected by a newly designed low cost PTC of 20m2 with a single tracking axis and is concentrated on an opaque pipe collector in which flows as thermal fluid Therminol� 66 oil. An oil-free scroll expander coupled with a 2kW electrical generator is used to convert fluid energy into electrical energy. Cogeneration is performed by accumulating the waste in a double effect tank for domestic hot water (DHW) and heating. The use of cogeneration improves the global efficiency of the system from about 12\% up to 30\%. The numerical model implements the primary and secondary circuit as well as a detailed model of the PTC and the scroll expander. Real weather data of Brindisi (Italy) is considered to estimate and to optimize the performance of the plant. The system control has been optimized with the numerical model based on a multi objective genetic algorithm to increase the performance of the expander with the development of energy-save strategies.},
      number = {2},
      journal = {International Journal of Renewable Energy Research},
      author = {Potenza, Marco and Naccarato, Fabrizio and De Risi, Arturo and Stigliano, Giambattista},
      year = {2014},
      pages = {508--518}
    }

    P. Guarino, G. L. Cascella, S. Stasi, M. Dassisti, and M. Chimienti, “Design of Solar Powered Ultra-light Aircrafts: Realization of a Model and its Validation,” International Journal of Energy, vol. 8, iss. 8, pp. 16-23, 2014.
    [Download PDF] [abstract]

    In this paper the authors present a model suitable to convert ultralight airplanes propulsion system from endothermic into electric, focusing only on the power management issues, discarding the mechanical and dynamic ones. The model developed represents a tool to correctly size the propulsion and energy management system of ultra-light aircrafts designed for short endurance flights. The authors performed several experiments to validate the model and to verify the efficiency of the designing tool.

    @article{guarino_design_2014,
      title = {Design of {Solar} {Powered} {Ultra}-light {Aircrafts}: {Realization} of a {Model} and its {Validation}},
      volume = {8},
      url = {http://www.naun.org/main/NAUN/energy/2014/a062009-109.pdf},
      abstract = {In this paper the authors present a model suitable to convert ultralight airplanes propulsion system from endothermic into electric, focusing only on the power management issues, discarding the mechanical and dynamic ones. The model developed represents a tool to correctly size the propulsion and energy management system of ultra-light aircrafts designed for short endurance flights. The authors performed several experiments to validate the model and to verify the efficiency of the designing tool.},
      number = {8},
      journal = {International Journal of Energy},
      author = {Guarino, Paolo and Cascella, Giuseppe Leonardo and Stasi, Silvio and Dassisti, Michele and Chimienti, Michela},
      year = {2014},
      pages = {16--23}
    }

    V. Di Lecce, M. Dassisti, D. Soldo, A. Giove, A. Quarto, A. Galiano, and M. Chimienti, “Improving sustainability of energy production: design of a demand side management system using an auction model,” in Digital Enterprise Design & Management – Proceedings of the Second International Conference on Digital Enterprise Design and Management DED&M 2014, 2014.
    [Download PDF] [abstract]

    This work presents an intelligent demand side management (DSM) system modeled according to an auction based multi-agent system (MAS). The system is designed to improve the sustainability of energy self-production systems thanks to energy saving features while guaranteeing the maintenance of the user’s desired comfort level. The proposed system is composed of a sensor network and a central processing unit. Each network node is handled by an agent and it is able to regulate the power consumption of a single environment (e.g., a room). The first live tests were carried out within a public building. Results seems promising for maximizing the sustainability as well as the profitability of self-production energy systems

    @inproceedings{di_lecce_improving_2014,
      title = {Improving sustainability of energy production: design of a demand side management system using an auction model},
      url = {http://www.springer.com/engineering/computational+intelligence+and+complexity/book/978-3-319-04312-8},
      abstract = {This work presents an intelligent demand side management (DSM) system modeled according to an auction based multi-agent system (MAS). The system is designed to improve the sustainability of energy self-production systems thanks to energy saving features while guaranteeing the maintenance of the user's desired comfort level. The proposed system is composed of a sensor network and a central processing unit. Each network node is handled by an agent and it is able to regulate the power consumption of a single environment (e.g., a room). The first live tests were carried out within a public building. Results seems promising for maximizing the sustainability as well as the profitability of self-production energy systems},
      booktitle = {Digital {Enterprise} {Design} \& {Management} - {Proceedings} of the {Second} {International} {Conference} on {Digital} {Enterprise} {Design} and {Management} {DED}\&{M} 2014},
      author = {Di Lecce, V. and Dassisti, M. and Soldo, D. and Giove, A. and Quarto, A. and Galiano, A. and Chimienti, M.},
      year = {2014},
      keywords = {sustainability, demand side management system, auction, energy}
    }

    P. Mastrorilli, A. Rizzuti, M. Dassisti, G. Cozzolino, and M. Chimienti, “Investigation on a new mixed acid based support electrolyte for a Vanadium Redox Flow Battery,” in 1st Workshop on the State of the Art and Challenges of Research Efforts at POLIBA, 2014, pp. 141-146.
    [Download PDF] [abstract]

    Vanadium redox flow battery is one of the most promising technologies as electrochemical energy storage system, because of independence of energy and power rating, fast response, room temperature operation, and extremely long life. Vanadium redox flow battery is suitable to work in combination to a wide range of renewable energy application (e.g. solar, eolic, tidal). Due to the intrinsic discontinuous nature of the renewable energy sources, vanadium redox flow battery may represent an efficient tool for the requalification of the energy provided to the grid. Key factors such as the energy density and the operating temperature range depend on the properties of the battery electrolyte. This work deals with a study of newly designed support electrolyte based on aqueous mixed acid solutions conceived to overcome the performance of a conventional vanadium redox flow system.

    @inproceedings{mastrorilli_investigation_2014,
      title = {Investigation on a new mixed acid based support electrolyte for a {Vanadium} {Redox} {Flow} {Battery}},
      volume = {1},
      url = {http://www.gangemieditore.com/scheda_articolo.php?id_prodotto=4996&isbn=9788849229691},
      abstract = {Vanadium redox flow battery is one of the most promising technologies as electrochemical energy storage system, because of independence of energy and power rating, fast response, room temperature operation, and extremely long life. Vanadium redox flow battery is suitable to work in combination to a wide range of renewable energy application (e.g. solar, eolic, tidal). Due to the intrinsic discontinuous nature of the renewable energy sources, vanadium redox flow battery may represent an efficient tool for the requalification of the energy provided to the grid. Key factors such as the energy density and the operating temperature range depend on the properties of the battery electrolyte. This work deals with a study of newly designed support electrolyte based on aqueous mixed acid solutions conceived to overcome the performance of a conventional vanadium redox flow system.},
      booktitle = {1st {Workshop} on the {State} of the {Art} and {Challenges} of {Research} {Efforts} at {POLIBA}},
      author = {Mastrorilli, Piero and Rizzuti, Antonino and Dassisti, Michele and Cozzolino, Gennaro and Chimienti, Michela},
      editor = {Spa, Gangemi Editore},
      month = nov,
      year = {2014},
      pages = {141--146}
    }

2013

    F. Campobasso and A. Fanizzi, “A Fuzzy Approach to Discriminant Analysis based on the Results of an Iterative Fuzzy k-Means Method,” in 5th International Conference on Fuzzy Computation Theory and Applications – FCTA 2013, 2013.
    [abstract]

    The common classification techniques are designed for a rigid (even if probabilistic) allocation of each unit into one of several groups. Nevertheless the dissimilarity among combined units often leads to consider the opportunity of assigning each of them to more than a single group with different degrees of membership. In previous works we proposed a fuzzy approach to discriminant analysis, structured by linearly regressing the degrees of membership of each unit to every groups on the same variables used in a preliminary clustering. In this work we show that non-linear regression models can be used more profitably than linear ones. The applicative case concerns the entrepreneurial propensity of provinces in Central and Southern Italy, even if our methodological proposal was initially conceived to assign new customers to defined groups for Customer Relationship Management (CRM) purposes

    @inproceedings{campobasso_fuzzy_2013,
      title = {A {Fuzzy} {Approach} to {Discriminant} {Analysis} based on the {Results} of an {Iterative} {Fuzzy} k-{Means} {Method}},
      abstract = {The common classification techniques are designed for a rigid (even if probabilistic) allocation of each unit into one of several groups. Nevertheless the dissimilarity among combined units often leads to consider the opportunity of assigning each of them to more than a single group with different degrees of membership. In previous works we proposed a fuzzy approach to discriminant analysis, structured by linearly regressing the degrees of membership of each unit to every groups on the same variables used in a preliminary clustering. In this work we show that non-linear regression models can be used more profitably than linear ones. The applicative case concerns the entrepreneurial propensity of provinces in Central and Southern Italy, even if our methodological proposal was initially conceived to assign new customers to defined groups for Customer Relationship Management (CRM) purposes},
      booktitle = {5th {International} {Conference} on {Fuzzy} {Computation} {Theory} and {Applications} - {FCTA} 2013},
      author = {Campobasso, Francesco and Fanizzi, Annarita},
      year = {2013}
    }

    G. Pirlo, M. Chimienti, M. Dassisti, D. Impedovo, and A. Galiano, “Document Image Retrieval by Layout Analysis,” in Congresso Nazionale AICA 2013 – Frontiere Digitali: dal Digital Divide alla Smart Society, Universitá degli studi di Salerno, 2013, vol. 1, pp. 644-653.
    [abstract]

    A new layout-based document image retrieval system is presented in this paper. The system is specifically designed for commercial form retrieval and uses mathematical morphology to extract structural components from the document image. Document layout description is performed by the Radon Transform whereas Dynamic Time Warping is used for matching. The experimental results have been carried out on both real and simulated data sets. They demonstrate the effectiveness of the proposed approach and their robustness with respect to different classes of commercial forms and shifted/rotated document images.

    @incollection{pirlo_document_2013,
      title = {Document {Image} {Retrieval} by {Layout} {Analysis}},
      volume = {1},
      isbn = {978-3-642-41180-9},
      abstract = {A new layout-based document image retrieval system is presented in this paper. The system is specifically designed for commercial form retrieval and uses mathematical morphology to extract structural components from the document image. Document layout description is performed by the Radon Transform whereas Dynamic Time Warping is used for matching. The experimental results have been carried out on both real and simulated data sets. They demonstrate the effectiveness of the proposed approach and their robustness with respect to different classes of commercial forms and shifted/rotated document images.},
      booktitle = {Congresso {Nazionale} {AICA} 2013 - {Frontiere} {Digitali}: dal {Digital} {Divide} alla {Smart} {Society}},
      publisher = {Universitá degli studi di Salerno},
      author = {Pirlo, Giuseppe and Chimienti, Michela and Dassisti, Michele and Impedovo, Donato and Galiano, Angelo},
      year = {2013},
      keywords = {Document Image Retrieval, Document management, Dynamic Time Warping, Mathematic Morphology, Radon Transform, sustainability},
      pages = {644--653}
    }

    V. Di Lecce, A. Quarto, A. Galiano, M. Dassisti, and M. Chimienti, “An auction based agency for demand side management system: An evaluation,” in Instrumentation and Measurement Technology Conference (I2MTC), 2013 IEEE International, 2013, pp. 77-82.
    [abstract]

    Aim of this work is to present a model of an intelligent short term demand side management system (DSM) based on a distributed measurement and management data system. The system is designed to improve the profitability of modern self-production energy plants reducing the power consumption and maintaining the same comfort level for users. The DSM problem is modeled as an auction based multi-agent system. The proposed system is composed of a sensor network and a central processing unit. Each network node is handled by an agent and it is able to regulate the power consumption of a single environment (in this work a room of a public building). Each agent reacts to a new critical condition entering in competition with the others to gain the access at a shared limited resource. The competition is regulated by an auction based system. As the first experimental results are showing, the proposed system can be the consumer’s key to maximize the profitability of the self-production energy plants.

    @inproceedings{di_lecce_auction_2013,
      title = {An auction based agency for demand side management system: {An} evaluation},
      doi = {10.1109/I2MTC.2013.6555385},
      abstract = {Aim of this work is to present a model of an intelligent short term demand side management system (DSM) based on a distributed measurement and management data system. The system is designed to improve the profitability of modern self-production energy plants reducing the power consumption and maintaining the same comfort level for users. The DSM problem is modeled as an auction based multi-agent system. The proposed system is composed of a sensor network and a central processing unit. Each network node is handled by an agent and it is able to regulate the power consumption of a single environment (in this work a room of a public building). Each agent reacts to a new critical condition entering in competition with the others to gain the access at a shared limited resource. The competition is regulated by an auction based system. As the first experimental results are showing, the proposed system can be the consumer's key to maximize the profitability of the self-production energy plants.},
      booktitle = {Instrumentation and {Measurement} {Technology} {Conference} ({I}2MTC), 2013 {IEEE} {International}},
      author = {Di Lecce, V. and Quarto, A. and Galiano, A. and Dassisti, M. and Chimienti, M.},
      year = {2013},
      keywords = {Energy consumption, auction based agency, Auction Based Energy Management, auction based multiagent system, auction based system, Buildings, central processing unit, demand side management, demand side management system, Detectors, distributed measurement, DSM problem, management data system, Monitoring, Multi Agent System, power consumption, Power demand, profitability, public building, self-production energy plants, sensor network, shared limited resource, Temperature measurement},
      pages = {77--82}
    }

    P. Guarino, G. L. Cascella, S. Stasi, M. Dassisti, and M. Chimienti, “Multiobjective Optimization for Electric Drives Design in Solar-Powered Ultralight Aircrafts,” in Proceedings of the 17th International Conference on Systems (part of CSCC ’13) – WSEAS/NAUN International Conferences Rhodes Island, Greece July 16-19, 2013, 2013.
    [Download PDF] [abstract]

    This paper presents design considerations for a low altitude short endurance electric powered ultralight aircraft with solar panels. The paper focuses on the conversion of the ultralight propulsion system from endothermic into electric, discarding the mechanic and dynamic issues from the design, and addressing the sizing consideration principally on the energy management system components. A tool is presented to optimize the choice of the battery and the panel mass.

    @inproceedings{guarino_multiobjective_2013,
      title = {Multiobjective {Optimization} for {Electric} {Drives} {Design} in {Solar}-{Powered} {Ultralight} {Aircrafts}},
      url = {http://www.wseas.us/e-library/conferences/2013/Rhodes/SYSTEMS/SYSTEMS-02.pdf},
      abstract = {This paper presents design considerations for a low altitude short endurance electric powered ultralight aircraft with solar panels. The paper focuses on the conversion of the ultralight propulsion system from endothermic into electric, discarding the mechanic and dynamic issues from the design, and addressing the sizing consideration principally on the energy management system components. A tool is presented to optimize the choice of the battery and the panel mass.},
      booktitle = {Proceedings of the 17th {International} {Conference} on {Systems} (part of {CSCC} '13) - {WSEAS}/{NAUN} {International} {Conferences} {Rhodes} {Island}, {Greece} {July} 16-19, 2013},
      author = {Guarino, Paolo and Cascella, Giuseppe Leonardo and Stasi, Silvio and Dassisti, Michele and Chimienti, Michela},
      year = {2013}
    }

    F. Campobasso and A. Fanizzi, “A Proposal for a Discriminant Analysis Based on the Results of a Preliminary Fuzzy Clustering,” in Computational Science and Its Applications–ICCSA 2013, B. Murgante, S. Misra, M. Carlini, C. Torre, H. Nguyen, D. Taniar, B. Apduhan, and O. Gervasi, Eds., Springer Berlin Heidelberg, 2013, vol. 7974, pp. 444-456.
    [Download PDF] [abstract]

    The common classification techniques are designed for a rigid (even if probabilistic) allocation of each unit into one of several groups. Nevertheless the dissimilarity among combined units often leads to consider the opportunity of assigning each of them to more than a single group with different degrees of membership. The same logic can be applied in attributing a new observation to previously identified fuzzy groups. This paper precisely presents a proposal for a discriminant analysis, structured by regressing the degrees of membership to every groups of each unit on the same variables used in a preliminary clustering. Such a proposal, initially conceived to assign new customers to defined groups for Customer Relationship Management (CRM) purposes, is now tested in an applicative case concerning the entrepreneurial propensity of the sampled provinces of Central and Southern Italy, in which an iterative fuzzy k-means method is preliminary used to split them into an optimal number of homogeneous groups

    @incollection{campobasso_proposal_2013,
      series = {Lecture {Notes} in {Computer} {Science}},
      title = {A {Proposal} for a {Discriminant} {Analysis} {Based} on the {Results} of a {Preliminary} {Fuzzy} {Clustering}},
      volume = {7974},
      isbn = {978-3-642-39648-9},
      url = {http://dx.doi.org/10.1007/978-3-642-39649-6_32},
      abstract = {The common classification techniques are designed for a rigid (even if probabilistic) allocation of each unit into one of several groups. Nevertheless the dissimilarity among combined units often leads to consider the opportunity of assigning each of them to more than a single group with different degrees of membership. The same logic can be applied in attributing a new observation to previously identified fuzzy groups. This paper precisely presents a proposal for a discriminant analysis, structured by regressing the degrees of membership to every groups of each unit on the same variables used in a preliminary clustering. Such a proposal, initially conceived to assign new customers to defined groups for Customer Relationship Management (CRM) purposes, is now tested in an applicative case concerning the entrepreneurial propensity of the sampled provinces of Central and Southern Italy, in which an iterative fuzzy k-means method is preliminary used to split them into an optimal number of homogeneous groups},
      booktitle = {Computational {Science} and {Its} {Applications}–{ICCSA} 2013},
      publisher = {Springer Berlin Heidelberg},
      author = {Campobasso, Francesco and Fanizzi, Annarita},
      editor = {Murgante, Beniamino and Misra, Sanjay and Carlini, Maurizio and Torre, CarmeloM. and Nguyen, Hong-Quang and Taniar, David and Apduhan, BernadyO. and Gervasi, Osvaldo},
      year = {2013},
      keywords = {customer relationship management, entrepreneurial propensity, fuzzy clustering, Fuzzy discriminant analysis, linear regression model},
      pages = {444--456}
    }

    G. Pirlo, M. Chimienti, M. Dassisti, D. Impedovo, and A. Galiano, “Layout-Based Document-Retrieval System by Radon Transform Using Dynamic Time Warping,” in Image Analysis and Processing (ICIAP 2013), A. Petrosino, Ed., Springer Berlin Heidelberg, 2013, vol. 8156, pp. 61-70.
    [Download PDF] [abstract]

    In the context of sustainability of document management technologies, this paper presents a new system for layout-based document retrieval specifically designed for commercial form retrieval. The system first uses a technique based on mathematical morphology to extract grid-based structural components from the document image. Successively, Radon Transform is used for document layout description. A document matching technique based on dynamic time warping is finally adopted. The experimental results carried out on real and simulated data set, demonstrate the effectiveness of the approach with respect to different classes of commercial forms.

    @incollection{pirlo_layout-based_2013,
      series = {Lecture {Notes} in {Computer} {Science}},
      title = {Layout-{Based} {Document}-{Retrieval} {System} by {Radon} {Transform} {Using} {Dynamic} {Time} {Warping}},
      volume = {8156},
      isbn = {978-3-642-41180-9},
      url = {http://dx.doi.org/10.1007/978-3-642-41181-6_7},
      abstract = {In the context of sustainability of document management technologies, this paper presents a new system for layout-based document retrieval specifically designed for commercial form retrieval. The system first uses a technique based on mathematical morphology to extract grid-based structural components from the document image. Successively, Radon Transform is used for document layout description. A document matching technique based on dynamic time warping is finally adopted. The experimental results carried out on real and simulated data set, demonstrate the effectiveness of the approach with respect to different classes of commercial forms.},
      booktitle = {Image {Analysis} and {Processing} ({ICIAP} 2013)},
      publisher = {Springer Berlin Heidelberg},
      author = {Pirlo, Giuseppe and Chimienti, Michela and Dassisti, Michele and Impedovo, Donato and Galiano, Angelo},
      editor = {Petrosino, Alfredo},
      year = {2013},
      keywords = {sustainability, Document Image Retrieval, Document management, Dynamic Time Warping, Mathematic Morphology, Radon Transform},
      pages = {61--70}
    }

    P. Guarino, G. L. Cascella, S. Stasi, M. Dassisti, and M. Chimienti, “New Strategies for Electric Drives Applications in Solar-Powered Airplanes,” in Proceedings of the 17th International Conference on Systems (part of CSCC ’13) – WSEAS/NAUN International Conferences Rhodes Island, Greece July 16-19, 2013, 2013.
    [Download PDF] [abstract]

    This paper surveys the proposed solutions for the design of an ultra-light Unmanned Aerial Vehicles, investigating the requirements for the components of the structure. In particular this paper focuses on the electrical components of the project, showing a brief review of the single objects and their applicability for the design of a Solar Powered Airplane. The aim of this paper is to offer a starting point for researchers who wants to approach the design of electric drives for solar powered airplanes, giving basic information about the state of the art of the UAV projects and the requirements for the power system management elements.

    @inproceedings{guarino_new_2013,
      title = {New {Strategies} for {Electric} {Drives} {Applications} in {Solar}-{Powered} {Airplanes}},
      url = {http://www.wseas.us/e-library/conferences/2013/Rhodes/SYSTEMS/SYSTEMS-03.pdf},
      abstract = {This paper surveys the proposed solutions for the design of an ultra-light Unmanned Aerial Vehicles, investigating the requirements for the components of the structure. In particular this paper focuses on the electrical components of the project, showing a brief review of the single objects and their applicability for the design of a Solar Powered Airplane. The aim of this paper is to offer a starting point for researchers who wants to approach the design of electric drives for solar powered airplanes, giving basic information about the state of the art of the UAV projects and the requirements for the power system management elements.},
      booktitle = {Proceedings of the 17th {International} {Conference} on {Systems} (part of {CSCC} '13) - {WSEAS}/{NAUN} {International} {Conferences} {Rhodes} {Island}, {Greece} {July} 16-19, 2013},
      author = {Guarino, Paolo and Cascella, Giuseppe Leonardo and Stasi, Silvio and Dassisti, Michele and Chimienti, Michela},
      year = {2013}
    }